Abundance Cornucopia Thanksgiving Clay Cutter

The size of the cutter is 1.25" (32mm) Wide

Hello Creators!

It is recommended to work on a tile, acrylic or a glass sheet, in this way you can avoid the clay from sticking to your cutter. Gently press into clay, slightly wiggle the cutter and lift it to remove. You can use corn starch or water to keep the clay from sticking to your cutter, and also for small cutters or cutters with details.

🌻SPECIFICATIONS🌻
-All cutters have 0.3 cutting edge designed for a clean and sharp cut giving you less post baking sanding. Cutters are 3D printed and may have small irregularities, but it will not affect the quality of the cutter. Edges can be smoothed with fingertips, silicone brush or sanded after baking.
-Measurements are taken at the widest or tallest part of the shape, is the measure of the inside, therefore the actual measure of the piece of clay that is cut. Please allow for a +/- 0.5mm variance.
- PLA, also known as polylactic acid or polylactide, is a thermoplastic made from renewable resources such as corn starch, tapioca roots or sugar cane.

🌻CARE🌻
These clay cutters are somewhat flexible, but bending them beyond their limits may break or permanently bend them, so please be gentle!
Wash with warm water & soap as desired, but do not put in the dishwasher. These are not dishwasher safe, the plastic will melt at high temperatures.

We don’t offer refunds or exchanges for this product due to hygiene reasons but please feel free to let us know if there are damages or breakage upon receipt of this item.
If you need a different size, just shoot us a message.
If you have any questions about sizing or how to use your cutter please contact us.

We would love to see all your creations made with your new tools! Please tag us @mooistudio_cutters on Instagram.